Metalworking pages index
Sharpening, end mills.
Sharpening, boring tools.
Sharpening, milling and turning tools, etc.
Sharpening, tool and cutter. Book.
Shaping and sharpening, lathe boring tools.
Slitting saw, sharpening.
Slitting saw. Using on the lathe.
Silver steel, hardening and tempering.
Sharpening, basic grinding rest for.
Sharpening, advanced grinding rest for.
Sharpening att. off hand grinder, end mills.
Sharpening, converted off hand grinder.
Sharpening drills.
S
Saddle stop for the lathe.
Saddle stop for the lathe. Using.
Saddle stop for the lathe. Use, left to right.
Screw cutting a square thread leadscrew.
Screw cut, every changewheel combination
Screw cut, every changewheel combination
possible, with a metric leadscrew.
Screw cut, every changewheel combination
possible, with and imperial leadscrew.
Screw cutting, chaser holder.
Screw cutting, using a single Coventry die
Screw cutting, internal.
head chaser.
Possible using 15 gears. Data.
Setup, lathe, initial, to turn parallel, etc.
Screw cutting complex pitches, worms,
metric pitches on a imperial lathe, etc.
Screw cutting, using indexable tipped tools
Soft jaws, for the three jaw chuck.
Soft jaws, add on auxiliary hexagon jaws.
Soft jaws. Using.
Soft jaws. Using.
Small holes boring on the lathe.
T
Steam engine, Tina. Making on the lathe.
Steam engine, Stuart 10V/H.
Stub mandrels, taper and stub. Using.
Square-
Stub mandrels, taper and stub, making.
Steadies, fixed and travelling.
Steadies, fixed. Using.
Steadies, travelling. Using.
T
Table Stops, X & Y, Milling Machine.
Square collets. Using individual jaws.
Soft jaws. Using when making pinions.
Setup galleries.
Tailstock turret, three way.
Taper stub mandrels. Using.
Taper turning, Morse and others.
Tapping drill sizes.
Tapping stand, auto feed to match th pitch.
Tee slot cutter.
Three jaw chuck soft jaws.
Tilting angle plate, from castings.
Tilting vice, budget, improving.
Tee slots.
Test bar, for between centres use.
Three jaw chuck soft jaws. Using.
Tina, stationary steam engine.
Tipped tools, indexable, screw cutting.
Tool post, quick change.
Tool and Cutter Sharpening. Book.
Tool and Cutter grinding head.
Tool and Cutter sharpening.
Timber Characteristics
Tailstock Die Holders