Tips&Processes 1

Workshop Tips & Processes 1

This page links to the Workshop Tips and Processes pages included on the web site

TURNING A MORSE (OR OTHER) TAPER

ROTARY TABLE USING

FIXED AND TRAVELLING LATHE STEADIES USING

THREE JAW CHUCK SOFT JAWS, USING

LATHE SADDLE STOP USING

MACHINING A CHUCK, FACEPLATE, ETC. TO FIT A LATHE’S THREADED MANDREL

BORING SMALL HOLES ON THE LATHE

MANDRELS FOR WORK HOLDING ON THE LATHE, USING

LATHE MOUNTED MILLING HEAD, USING

SETTING MILLING MC SPINDLE VERTICAL (TRAMMING) /Effects on the finish achieved

MACHINING A BARREL SHAPED CON ROD

MACHINING CASTINGS AND CAST IRON PART 1 (MAKING A KEATS ANGLE PLATE)

MACHINING CASTINGS AND CAST IRON PART 2 MAKING A VEE ANGLE PLATE)

TOOL AND CUTTER SHAPING AND SHARPENING

BORING TOOLS SHAPING AND SHARPENING

TOOLMAKERS CLAMPS, USING

LATHE’S FACEPLATE, USING

TOOLMAKERS BUTTONS, MAKING AND USING

WORKPIECE CLAMPING ON THE MACHINE TABLE

LATHE SETUP, TURNING PARALLEL, ETC.

HARDENING AND TEMPERING

USING KEATS AND VEE ANGLE PLATES.(SEE ALSO PROCESSES 12 AND 13)

DRILL SHARPENING, THE BASICS, PLUS THE FOUR FACET METHOD

See Page Two for Additional Processes

CUTTING WORM GEARS

Workshop Tip Pages

For a photograph relating to the process, click on the title

SCREW CUTTING COMPLEX PITCHES

Place cursor on description for more details

Place cursor on description for more details